Garmin 010-00705-48 Reactor 40 Mechanical/Retrofit/Solenoid Corepack Autopilot

Boat Autopilot System; Reactor™ 40; For 40 Autopilot Powerboats, Sailboats And Mechanical/Retrofit/Solenoid; CCU 4.3 Inch Width x 4.4 Inch Height x 1.9 Inch Depth; ECU 6.6 Inch Width x 4.6 Inch Height x 2.1 Inch Depth; 10 To 30 Volt; With Reactor 40 CCU (Course Computer Unit), ECU (Electronic Control Unit), ECU Power Cable, Interconnect Cable, Buzzer, 2 Meters NMEA 2000® Drop Cables, NMEA 2000 T-Connectors, Male/ Female Terminators; GHC 20 Helm Control Display Not Included

With a complete package designed for powerboats and sailboats, Garmin brings an advanced marine technology to the boating public that was once only available for commercial boats. The Reactor 40 autopilot series is simply the most responsive autopilot system we have ever offered. Reactor 40 autopilots are very versatile. Both powerboat and sailing features are available in all corepacks, including heading hold, wind hold, tack and jibe, step turns and more; simply pick the autopilot that’s compatible with your existing steering system. If you don’t see a compatible Reactor 40, you’ll find the Reactor 40 mechanical, retrofit, solenoid is compatible with a wide variety of steering systems, whether hydraulic, cable drive, mechanical and solenoid. Just pair GRF ™ 10 with your drive system already on board. This Reactor 40 below-deck autopilot system gives captains that “extra set of hands” they need so you can safely attend to your sails, lines, winches and radios, without worry. With its solid-state 9-axis AHRS, Reactor 40 mounts anywhere, in any orientation and requires minimal commissioning. Combined with a compatible Garmin networked chartplotter, you can have full control of Reactor 40 from wherever you are on the boat. In addition to holding its course in virtually all weather and wind conditions, the system can smoothly perform a variety of preprogrammed trolling and search procedures.

Compatibility: 40 Autopilot Powerboats, Sailboats And Mechanical/Retrofit/Solenoid

Dimension: CCU 4.3 InchWidth x 4.4 InchHeight x 1.9 InchDepth,ECU 6.6 InchWidth x 4.6 InchHeight x 2.1InchDepth

Voltage Rating: 10 To 30 Volt

Features

Solid-State 9-Axis Attitude Heading Reference System

Minimal Commissioning And Calibration

Minimizes Heading Error, Course Deviation, Rudder Movement And Power Consumption While Providing A Comfortable Ride

Supports Heading Hold, Wind Hold, Step Turns And Tack And Jibe Modes

Fully Gasketed, High-Impact Plastic, Waterproof To IEC 529 IPX7 Standards

Limited 1 Year Warranty